A dino cake for a 1YO

IMG_8832

Some weeks ago, I received a FB message from a mom asking me if  I could bake her son a cake for his one-year-old 20131110-142901.jpgcelebration. According to her, she would gladly support a SAHM for the effort as compared to purchasing one from a bakery. I was obviously happy that someone (a stranger!) would trust me enough to perform this task. Originally, a simple vanilla cake with buttercream was asked for and since the son loves this dinosaur that he often plays with, I came up with the first design.

Subsequently, the mom asked if it was possible to do a cake covered with fondant + a figurine and gave me a budget. Another draft was then made.

Draft 1 | Buttercream cake

Draft 1 | Buttercream cake

Second draft | Fondant cake

Draft 2 | Fondant cake

Thankfully, the mom was rather easy-going and accepted the proposed design very quickly. Love working with such people!

One week before the actual delivery, the figurine was made since it takes time to dry the material. I used full gumpaste for the dinosaur and tried to sculpt it based on the picture I received.

IMG_8689 IMG_8690
To create the desired colour, I combine orange and red. Divide the gumpaste into the various parts of the dinosaur.

IMG_8692This is the first dino that I made which is quite ugly in my opinion due to the cracks.

IMG_8693The second dino. Much smoother and I painted it with the relevant {food} colours.

After the figurine is done, it is left to dry. Since I have no air-con and I do fear that it will not dry in time, I dried it using the fan and it was switched on 24 hours for 2 days! I also wrapped the dino with clingflim as I’m afraid the hands will not stay intact. Thankfully after 2 days, I could safely say it was okay!

Next, a day before the collection, the vanilla cake was baked and sandwiched using IMBC. Since the mom had requested for a less sweet cake, I reduced the amount of sugar and hoped that it would be to her liking. The cake has to be completely cooled before covering with fondant and that’s the reason why I baked it a day before.

 IMG_8787 IMG_8788

Something went wrong after I’ve covered the cake with fondant the first time. The air pockets expanded and they made the cake rather grotesque. Thankfully, I covered the cake the night before and I could redo the whole act on the day of delivery. A few reasons could contribute to the air bubbles but I believe the main reason is that my place is warm and this results.

IMG_8817

Thankfully, there is still sufficient time and I re-covered the entire cake using another type of buttercream and this time round, I made sure that I covered well so that air bubbles could be minimised.

IMG_8790 IMG_8822

Roll out fondant to a thickness of 1/4 inch. Since this is a 8″ by 3″ cake, I rolled to a circle of diameter 14cm.

IMG_8823

Sometimes, when we cover the cake, it may not be a perfect job but no worries, borders can always cover up the imperfection. This is meant to be the grass on the sides of the cake and then I covered another stripe of chocolate fondant over it as the mud/ ground. The fondant is chocolate-flavoured and tastes not bad!

IMG_8824 IMG_8825

Once these are done, the rest can be quickly assembled.

IMG_8820

These should be made beforehand so that they are a tad dry during assembling.

IMG_8826

 IMG_8838 IMG_8834

This cake will only be consumed the next day and I certainly hope there will not be any major problem!
Dear cake, please do your part to satisfy the family and the birthday boy.

IMG_8841

Clingwrapped and off to be delivered.

Complimentary cupcakes for the boy to play with. Hah!

Complimentary cupcakes for the boy to play with. Hah!

Lessons learnt and changes to be made in future:

1) Cover the cake with chocolate ganache to ensure smooth covering and prevent air bubbles
http://www.artandappetite.com/2009/11/ganache-instead-of-buttercream/

2) Cake should be covered, assembled, delivered and consumed within the same day, if possible.

3) Press down the layers of cake after sandwiching with buttercream to prevent any trapped air

4) Consider installing air-conditioner?

About air bulging after covering cake fondant

http://cakecentral.com/t/686940/fondant-and-buttercream-bulges-air-bubbles

http://www.deliciouscakedesign.com/blog/?tag=air-bubbles-under-fondant

http://www.artandappetite.com/2009/11/ganache-instead-of-buttercream/

For Vanilla Cake (Yields an 8 x 2″ cake)
I made 2 portions for this cake

2 3/4 cups plain flour
2 tsp baking powder
200g unsalted butter, at room temperature
1 1/2 cups castor sugar
4 eggs
1 tbsp vanilla extract
1 cup milk

1. Preheat the oven to 180C. I used 2 8-inch tins. Line the tins with baking paper.

2. Sift the flour and baking powder together.

3. In a standmixer with paddle attachment, cream the butter for about 1 minute. Gradually add the castor sugar. Beat until the mixture is light and fluffy and the sugar has almost dissolved.

4. Add the eggs, one at a time, beating until each addition is incorporated.IMG_8723

5. Add the vanilla extra and beat until combined.

6. With mixer on low speed, add a third of the flour mixture and beat until combined. Add half of the milk and beat. Repeat and then add the remaining flour mixture and beat until combined.

6. Spoon mixture into baking tins. Bake for about 30-40 minutes or until a fine skewer inserted comes out clean.

For Italian Meringue Buttercream

You will need:
190g caster sugar
38g water
75g egg whites
1/2 tsp cream of tartar
200g unsalted butter, at room temperature, in cubes
1/2 tbsp vanilla extract

1. In a small saucepan over medium heat, combine the sugar and water. Make sure the sugar is dissolve in the water and cook the mixture until it reaches 120C. This will take from 5 to 10 minutes. After the sugar is dissolved (while continue boiling), I would wet a pastry brush and wet the sides of the pan to prevent sugar from crystalising.

2. While boiling the sugar  syrup, combine the egg whites and cream of tartar in the bowl of a stand mixer fitted with the whisk attachment. As soon as the sugar syrup reaches 115C degrees, start to whisk the egg whites on medium-low speed until soft peaks are formed. The sugar syrup is still being boiled at this time. When it reaches 120C, remove from the heat source. reduce the standmixer speed to low and drizzle in the sugar syrup from the side so that the hot syrup doesn’t splatter.  Raise the speed to high when all the syrup is poured in and continue to whisk until the mixture cools to room temperature (or when you can touch the steel bowl , 5 to 10 minutes.IMG_8786

3. Only when the meringue is cool enough should you begin to add the butter. I gauge using my sense of touch. If I can hold on to the sides of the steel bowl of the standmixer comfortably, it’s at the right temperature. Reduce the speed to medium. With the mixer running, drop in the butter, 1 tbsp or cube at a time, waiting until each is incorporated before adding another. The mixture may deflate and begin to look curdled. Just raise the speed to high and continue to add tbsp-size pieces of butter, making sure each is completely combined before adding more. When all the butter has been added, the frosting should be smooth and thick. Add the vanilla and mix to combine.

Feedback from customer: Thankfully the air bubbles did not show up! They were happy with the workmanship though they find that the cake is firm ( not much of a choice, I’m afraid!) and a bit too sweet. So, that means I still have to reduce the amount of sugar!

Advertisements

One thought on “A dino cake for a 1YO

  1. Pingback: Happy 1st birthday, Faith & the rainbow cake | Raising Faith

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s